Opens in a new tab
Machine down? Call 1-603-483-0333

Bow, New Hampshire · Mon–Fri, 7:00 AM–4:30 PM EST

Request a Repair Estimate

Send us the make, model and what it is doing. Photos help.

HST Quote Request

Photos help us quote faster. Up to 3 images, 4 MB each. Phone photos are often larger than that — if one is rejected, resize it before attaching.

Machine down now? Call 1-603-483-0333

Menu

Nachi-Fujikoshi Repair and Rebuild

We repair Nachi Fujikoshi spindles to like new condition, guaranteed. Please email or call us at 603-483-0333 for a repair estimate.

Your Nachi Fujikoshi spindle is in expert hands with the experienced technicians at HST Spindles, Inc. We have repaired dozens of Nachi-Fujikoshi spindles to original factory performance. Need it fast? We can repair your spindle within three days of approval. All spindle repairs are backed by a complete warranty and our 40-year reputation of OEM-quality spindle repair.

Here are just some of the common Nachi-Fujikoshi spindle performance issues that we resolve:

  • Noisy bearings
  • Contaminated bearings
  • Increased vibration
  • Damaged shaft
  • Poor part finish
  • Failed seal
  • Shaft end play
  • Shaft seized
  • Excessive runout at Taper ID
  • Quill stuck in shaft
  • Preventative Maintenance

At HST, we replace all bearings with top name-brand ABEC 7 super-precision spindle bearings. Your spindle repair will minimally include replacing all seals, grinding bearing spacers for proper preload and restoration of damaged shaft surfaces. Then we perform high-speed balancing to eliminate vibration, extend spindle life and improve finish quality on parts. HST has provided the CNC machining community with a high-quality alternative to higher-priced OEM spindle repairs since 1986.

CASE STUDIES

Job: I0609 

Nachi-Fujikoshi spindle (job I0609) before and after repair

Nachi-Fujikoshi spindle before and after

This Nachi-Fujikoshi spindle arrived to HST Spindles looking extremely worn and had a damaged bearing attached to the shaft with a wire tie. The customer had attempted to repair the spindle themselves and then quickly decided against it. (If you ever feel inclined to repair your own spindle, please take a look at our FAQ page Can I Repair My Own Spindle?).

The attached bearing and the bearings remaining within the spindle assembly were found to be worn, contaminated and damaged. Along with the damaged bearings we also found the rear housing bore to be significantly over-sized causing the rear bearing set to fit very loosely within the bore. There was also visible damage to the shaft pilot face.

Worn, contaminated bearings from a Nachi-Fujikoshi spindle

All bearings were worn and contaminated.

Rear housing bore of a Nachi-Fujikoshi spindle, marked with an arrow

Rear housing bore Oversized. Note fretting bands due to bearing looseness within the bore. Required Grind-Plate-Grind.

Upon repair of this Nachi-Fujikoshi spindle, we kiss ground the shafts Pilot face to eliminate runout and we restored the rear housing bore to new condition with our G-P-G process. Of course all bearings and seals were replaced with new. The spindle was test run and final balanced at max operating speed: 25,000 RPM! With a fresh coat of paint and a lot of polishing, the spindle also looked like new! In the end the customer was very pleased with the quick turn-around time and quality of repair. They were grateful to find a preferable alternative to sending their Nachi-Fujikoshi spindle back to the OEM for repair or replacement.

Rebuilt Nachi-Fujikoshi spindle wrapped with rust preventive

Rust Prevention

Nachi-Fujikoshi spindle carefully packaged in foam

Careful packaging

Packaged Nachi-Fujikoshi spindle being weighed for shipping

Ready to go!

With great pride and attention to detail our technicians were able to return this Nachi-Fujikoshi spindle to like new condition in a short period of time.

Package damaged in transit when a Nachi-Fujikoshi spindle arrived

Package damaged in transit

Seized Nachi-Fujikoshi spindle as received

Spindle as received

Job: I0022

This Nachi-Fujikoshi spindle was fortunate to make it to our facility having almost broke through the side of the box and possibly disappear forever. We always urge our customers to use safe packaging methods when sending their spindle in for repair. A tightly packaged spindle with some type of padding and a banded crate or box will prevent further damage to their spindle or total loss.

Upon receipt the customers main complaint was that the shaft had seized. Which is also what we noted when we received it. After the spindle was disassembled we found that the #2 bearing at the work end had failed catastrophically. The ball caged was essentially split down the middle and the rolling elements were destroyed causing the shaft to seize. Also of note was the unknown bright-green contamination that oozed out of the #1 bearing as soon as the front cover was removed.

Unknown contaminant found inside a Nachi-Fujikoshi spindle, marked with an arrow

Unknown contaminant!

Destroyed bearing from a seized Nachi-Fujikoshi spindle

Destroyed #2 bearing

The contamination observed within the assembly likely played a part in the failure of the bearing. However the main cause of failure was the fact that the bearings which we removed from the spindle were not rated for the spindles maximum operating speed of 25,000 RPM. After some research and discussion with our bearing suppliers, we were able to locate ceramic bearings that could handle the task.

All bearings and seals were replaced with new and the spindle was balanced at full speed. The spindle was restored to like new condition and returned to our customer with a kind reminder to make sure that the lubrication being supplied to the spindle was filtered, clean and otherwise operating properly. We even supplied a new oil fitting and applied PTFE tape to the threads so that it would be ready for install.

Nachi-Fujikoshi spindle after rebuild

Rebuild complete

New fitting provided with a rebuilt Nachi-Fujikoshi spindle

New fitting

Rebuilt Nachi-Fujikoshi spindle safely packaged for shipment

Spindle safely packaged

For expert Nachi-Fujikoshi repair, please email or call us at 1-603-483-0333 for a repair estimate. We are fast, experienced and our work is guaranteed!

Same machine, same symptoms?

Send us the make, model and what it is doing. Diagnosis takes 24–48 hours, and you get a firm quote before anything is touched. Repair typically costs 25–30% of a new spindle.